DR1XE und D-Star

[DD3JI]

Mit Hotspot daneben wohl:


With the addition of the UDRC, the DR-1X will operate in these configurations. (WIRES-X requires a Yaesu HRI-200 attached to an external radio)

• With the latest 1.00 family of firmware on the DR-1X
  • D-STAR/Analog
    
• With the latest 1.10 family (after December 2015) on the DR-1X
  • D-STAR/Analog
    
  • D-STAR/Digital Fusion
    
  • D-STAR/Digital Fusion/Analog
    

• WIRES-XThe DR-1X operates with a controller attached to the HD-15 accessory port or a Yaesu HRI-200 attached to the Mini DIN-10 connector. You cannot operate with both connected at the same time.  If you wish to run D-STAR via the UDRC and WIRES-X on the same repeater, it is necessary to set up a WIRES-X node on the repeater's frequencies.A WIRES-X node consists of a Microsoft Windows based computer, Yaesu HRI-200, and a radio like the FTM-100DR, with an antenna separate from the repeater.